Name:12 v up to 60 v DC - DC booster power module 1 a large current booster battery charging power supply power supply
Module Properties: non-isolated step-up module (BOOST)
Input voltage :10-32V
Output voltage: 60V
Output Current: 1A (MAX)
Input Current 8A (MAX)
Output Power: 60W (MAX)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating temperature: Industrial grade (-25 ° C +65 ° C) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)
Full load temperature: 45 degrees Celsius
Load Current: 25mA typical
Dynamic response speed: 5% 200uS
Short Circuit Protection: None (Please enter install fuse or protective circuit)
Input Reverse Polarity Protection: No, you can enter a series diode.
Volume, weight specifications:
74 (L) * 74 (W) * 32 (H) mm. Weighs about 280G
Note:
Within a length of one meter wire, the wire is not less than 1.5 square feet, the length if greater than 1 meter wire, bold, recommended 2.5 to 4 square line better.
2 module operates at high power, high temperature, when the outer shell, install the fan. Small power not add a fan, be sure that the module heat sink temperature of 80 degrees is not salvation.
3 use, the input can not be reversed, the output is not short-circuited
4 12V battery discharge voltage can not be lower than 10.5V
Lithium batteries used in tandem (single 3.7V) discharge voltage must not fall below 2.7V
